Winter cover for octagonal wooden pools 530 grey P-PB 580

Winter cover octagonal wooden pools 530 grey P-PB 580.
Weva 530 octagonal wooden pool protection and wintering cover for swimming pools in 5.3m maximum, coping included.
BWTmyPOOL coverage is a benchmark for winter roofing.
Very resistant, it preserves the water in your pool against cold, bad weather, external pollution and algae.
It makes it easier to get back up and running in the spring by preserving the quality of your water and thus saving you money on treatment products and time in cleaning.
The Cover BWTmyPOOL is manufactured in France in the factories of our supplier (who have been manufacturing blankets for more than 40 years).
And because we are sure of the quality of our product, we offer you a 2-year warranty.

A super protective cover.
The winter cover protects your pool and secures your pool for your children and pets. It complies with the NF P90-308 standard for anti-drowning protection.

Robust and Aesthetic Coverage
The BWTmyPOOL winter rug is made of a 580 gr/m² coated opaque PVC fabric, grey on the outside and sand on the inside.

Super secure coverage
For optimal adhesion of your cover to the pool, it is designed to extend at least 10 cm around the perimeter of the pool, including the coping, and is fixed under the curb (on the wooden wall of the pool) thanks to individual bungee cords and stainless steel hooks; the eyelets are made of grey PVC.
The dimensions of your winter cover are determined by the overall dimensions of your pool (including coping) + 20 cm on each length.

Installation and use:
We recommend that you position and center the cover on the pool.
In order to facilitate the positioning of the cover, it is advisable to leave the bubble cover on the water (option).
Locate the position of the eyelets on the blanket. The hook is to be positioned between two eyelets 32 cm from them.
The hook is fixed to the wall of the pool using 2 3x25 wooden screws.
Position two bungee cords on both widths.
Remove the bubble cover. Put the bungee cord assembly in the eyelets of the blanket.

After installation, make sure :
• that the bungee cords are not stretched to their maximum and that they can play their role as shock absorbers.
• that the roof is well centered in relation to the copings.
• that there are no folds formed in contact with the copings because the risk of abrasion would be increased.

Check from time to time: during the wintering period :
• that the drains provided for rainwater are not obstructed by external objects (leaves, branches, various objects, etc.)
• that there is no normal weight that makes the fastening systems work continuously and for a long time (accumulation of water, snow, etc.).
• that all fasteners are well fixed and in good condition to ensure perfect tension of the cover, guaranteeing the longevity of the product.
The maintenance of the roof is entirely the responsibility of its user.

Cleaning the roof : Pressure washer with cold water: keep the cleaning nozzle at least 40 cm from the cover.
Cleaning of the roof should be done regularly.
At least two cleanings per year are necessary (at the beginning and end of winter).

Security:
This coverage is not a substitute for common sense or individual responsibility.
Nor is it intended to replace the vigilance of parents and/or responsible adults, which remains the essential factor for the protection of young children.
Attention: Safety is only ensured with a closed cover that is properly installed in accordance with the manufacturer's instructions.
The cover must be systematically installed in the event of even temporary absence from the home.
Check for bathers or foreign objects in the pool before and during the manoeuvre.
The installation and removal of the roof should not be undertaken only by a responsible adult.
No climbing, walking or jumping on a safety blanket.
Take all measures to prevent access to the pool for young children, until the cover is repaired or when a malfunction is found to prevent the pool from closing and securing or in the event of temporary unavailability of the equipment or the pool.

Technical characteristics:
Colour: Grey
Dimensions: 5.08m x 5.08m
Thickness: 580g/m²
Round Octagonal Shape: Yes
With standardised bungee cord, diameter 9 mm, length 60 mm, beige.
Stainless steel hook, to be fixed.
Weight: 18 kg
2-year warranty
Several choices and versions available on request.


Specialist in high quality Design and Brands for individuals and professionals. We present trendy creations and objects from the biggest brands and designers. Expert in the sale of equipment, furniture and contemporary objects for the home, garden, swimming pool and well-being.