Comfortline BWT 8kw for pool 20 to 35 m3 Inverter heat pump

Comfortline BWT 8kw for pool 20 to 35 m3 Inverter heat pump
Comfortline Inverter - BWT heat pump.

Learn more:
Presentation of the ConfortlineInverter heat pump.
Thanks to the Comfortline Inverter heat pump heat your swimming pool above ground or buried. You will get then warmth, well-being and comfort while achieving significant energy savings. Economic heating of pools of open air by recovery in the air outside of the calories and direct transfer into the water of the pool. Allows heating implementation and maintenance of the water to the desired temperature.

Benefits of Confortline Inverter heat pump.
The Comfortline Inverter heat pump is the ideal solution to heat pools above ground or buried. 80% of the energy used to heat the pool is free. She works with a compressor Inverter that can vary from 20% to 100% of its power, depending on the outside temperature and operating conditions. At the beginning of the season, when demand for heating is high, the compressor and fan work at high speed (about 100%). The approach of the set point (desired temperature), the Inverter compressor reduces his power and uses the beaches of low speed operation. Which greatly promotes energy savings.

The heat pump works with air temperatures of 0 ° to 35 ° C (depending on humidity) and allows to extend the use of the pool season. Inverter heat pumps also allow to get a medium C.O.P of 9 in the following operating conditions: Air 26 ° c, water 26 ° c, humidity 80%.

The digital regulator ensures optimal protection of the heat pump and precise control of the temperature of the pool. It controls high and low pressure controllers, lack of water (flow switch) security, the defrosting by reverse cycle system and 5 temperature probes. 
The Comfortline Inverter heat pump has a titanium (twisted coil) heat exchanger that is resistant to chlorine and salt.
The bodywork of the Comfortline Inverter heat pump is made of steel galvanized, coated protection polymer anti corrosion for efficiency and increased durability.  
The Comfortline Inverter heat pump is a model all seasons running up to 0 ° C. 
Silent, thanks to the compressor low speed and to the fan motor, the Comfortline Inverter heat pump is equipped with a valve to 4 lanes for fast defrosting.
The Comfortline Inverter heat pump is equipped with thick rubber feet to insulate against vibration.

The R32 fluid
-The R32 fluid improves the volumetric output. The energy is greater than the other fluids such as R410A which is currently the most used fluid in heat pumps.
-The R32 is a mixed fluid, refrigerant is completely pure, that is, it will be even more easily recyclable.
-The refrigerant R32 is a refrigerant ahead of regulation because its impact less 75% on the environment compared with the current fluid on the market.

It has many features:
-inverter system: Comfortline Inverter heat pump works with a compressor Inverter that can vary from 20 to 100% of its power, depending on the outside temperature and operating conditions.
-a thermal controller: controllers for high and low pressures, lack of water (flow switch) security, the defrosting by reverse cycle system and the 5 temperature sensors, are controlled by a digital controller that provides protection optimal heat pump and precise control of the temperature of the pool.
-optimal protection of your pump against corrosion: Comfortline Inverter heat pumps body is made of steel galvanized, coated polymer protection, this corrosion protection is more durable and more efficient.

Technical features:
Volume pool recommended (m3): 20-35
Operating temperature range (° C): 0-43
OPERATING CONDITIONS: AIR 26 ° C, WATER 26 ° C, HUMIDITY 80%
Restored power (kwh): 8.0
C.O.P: 9.1-5.6
OPERATING CONDITIONS: AIR 26 ° C, WATER 26 ° C, HUMIDITY 70%
Restored power (kwh): 6.0
C.O.P: 5.9-4.1
Rated power (Kwh): 0.34 - 1.4
Type of refrigerant: R32
Rated current (A): 1.48 - 6.0
Power supply: 230 V / single phase / 50 Hz
Water flow rate recommended (m3/h): 2-4
1 m DB(a) acoustic power / 10 m DB(a): 20.8 - 31.1
Exchanger: Titanium Spiral Tube
Body: Metal coated plastic
Hydraulic connection (mm): 50
Net weight / gross weight (kg): 46
Dimensions Lxdxh (mm): 864 x 359 x 648
Dimensions in inches in cm: 33.85 "x 13.77" x 25.19 "
Warranty: 2 years

Specialist design and brands of high quality for individuals and professionals. We present the creations and trends of the major brands and designers objects. Expert from the sale of equipment, furniture and contemporary objects for the home, Garden, and well-being.